Top 5 Best Multimeters Buying Guide Of 2021

List Of Top 5 Best Multimeters Buying Guide Of 2021

Mastech Multimeter

Mastech Multimeter

Mastech Multimeter

The Mastech multimeter is a product produced by Mastech – a leading manufacturer of meters and other electronic devices. I was a little confused in the beginning of researching Mastech multimeters because some of the meters I thought were Sinometer were instead made by Mastech. Actually, Mastech is a division of Sinometer. According to www.sinometer.com, Sinometer originated multiple companies according to the different categories of product and Mastech is one of those companies.

Mastech was founded in 1987 and Sinometer in 1989. According to www.sinometer.com, Sinometer was the first company to introduce Made-in-China digital multimeters to the world market and Mastech claims to be the world’s largest instrument manufacturer. The Mastech multimeter has become a popular meter on the market.

The Mastech meter in general is well priced for what you get in return. The average meter cost is under $100 US dollars with a lot of their meters priced at under $50. Even with such a reasonably priced meter, it is evident that these meters are well built and they are not just a “cheap” multimeter. Many of the Mastech multimeters offer features that you just don’t see on lower-cost multimeters. Features such as relative measurement, data hold, and sleep mode are oftentimes only found on higher dollar multimeters.

Now, I personally do not own 100 Mastech multimeters, but what I do know about these meters is that almost all the reviews made by people who have bought them have been around 4 out of 5 stars on average. That is not a shabby rating for a meter that you don’t have to pay $400 bucks for.

So if you are in the market for buying a good multimeter and you don’t want or need to pay for an expensive multimeter, you may wish to check out a Mastech Multimeter at Amazon.com or check out our own Mastech Multimeter Review

Fluke 179

Fluke 179

Fluke 179

The Fluke 179 True RMS digital multimeter was designed specifically for industrial, electrical, electronic technicians, and engineers alike. Manufactured by Fluke, this is a meter of precision and quality that will last for years. Fluke even backs this meter with a lifetime warranty.

The fluke 179 multimeter has many features that are designed with the troubleshooter in mind. The big 3 3/4-digit, 6000 count resolution display not only updates about 4 times every second, but its backlight feature also makes reading measurements easy in low light conditions. By default, the backlight auto shuts off after 2 minutes.

This meter measures a wide variety of different electrical characteristics making it quite possibly, the only multimeter you will ever need. It measures AC /DC voltage and current, resistance, voltage, and current frequency, temperature, diodes, capacitance, and continuity.

The 179 is a smart meter. It can sense certain hazardous conditions that could harm the meter or the user and alerts the user via a message on the display. It displays the presence of a potentially dangerous voltage if it detects a voltage greater or equal to 30 volts or a voltage overload, and also reminds you to check the leads when you switch to or from the mA or A position.

A big concern for some of the cheaper meters, in particular, is the fact that they can be a big drain on their batteries. The 179 model multimeter enters a sleep mode if no change has been detected in 20 minutes. This feature greatly extends the battery life however, if you choose to do so, you can turn this feature off by pressing the yellow button when turning on the unit. The typical alkaline battery life for this unit is 400 hours.

It is not always easy to focus on holding the test leads in place while also checking the display for the read-out. This can potentially be unsafe for the user and also for the equipment being measured. The Fluke 179 has a built-in hold function and a min/max/average function. The hold function will hold the reading on the display and beeps to inform the user a new reading has been measured. Simply connect the leads to the measurement points, wait for the beep, remove test leads and check the display for the reading. The min/max/average function captured the minimum and the maximum input values and calculates the running average of the readings. The meter also beeps when a new high or low reading has been received.

Some more cool features of the fluke 179 multimeter:
  • Selectable manual or automatic ranging allowing for more flexible troubleshooting.
  • A bar graph that updates about 40 times every single second that is useful for measuring frequency.
  • Measures temperature (in Celsius or Fahrenheit) and comes shipped with the 80BK Temperature Probe.
  • The Fluke 179 is also compatible with the fluke toolpak meter hanging kit which allows you to free up both hands for making measurements and also prevents dropping the meter.

The Fluke 179 is another well-built multimeter by Fluke. This meter is highly recommended to anyone who wants or needs a high-quality multimeter.

Leave a Reply